Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source.
To change settings for an input source, make sure the source is connected and select that source.
|Sets the input signal resolution if not detected automatically using the Auto option|
|Aspect||See the list of available aspect ratios||Sets the aspect ratio (width-to-height ratio) for the selected input source|
|Changes the projected image ratio to make the edges visible by a selectable percentage or automatically|
|Tracking||Varying levels available||Adjusts signal to eliminate vertical stripes in computer images|
|Sync.||Varying levels available||Adjusts signal to eliminate fuzziness or flickering in computer images|
|Position||Up, down, left, right||Adjusts the image location on the screen|
|Automatically optimizes computer image quality|
|Advanced||HDMI Video Range
|HDMI Video Range:
Sets the video range to match the setting of the device connected
to the HDMI input port
Input Signal: Specifies the signal type from input sources connected to computer ports
Video Signal:Specifies the signal type from the input sources connected to the video ports; select Auto to automatically detect the signal