Connecting Multiple Projectors of the Same Model

If you use the interactive features of multiple projectors of the same model in the same room, you need to synchronize the projectors. To do this, connect the optional remote control cable set (V12H005C28) or a stereo mini cable to the SYNC port on each projector.
  1. Connect one end of the cable to the SYNC In port on one projector, and connect the other end to the SYNC Out port on the other projector.


    Note: If you are connecting three or more projectors, connect the projectors in a chain as shown.


  2. In the Extended menu, set the Sync of Projectors setting to Wired.
    Note: If you are using the projector in the same room as another projector that does not support cable connection or if you do not have the optional remote control cable or a stereo mini cable, set the Wired Sync Mode setting to Mode 2 in the projector's Extended menu.
    Note: If you do not have the optional remote control cable set, change the Distance of Projectors setting in the projector's Extended menu.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use