Make sure
you have your replacement cartridges handy before you begin. You
must install new cartridges immediately after removing the old
ones.
Note: Replace all
expended ink cartridges. You cannot print if any of the ink
cartridges are expended or any ink slots are empty.
Note: Epson
recommends the use of genuine Epson ink cartridges. Epson cannot
guarantee the quality or reliability of non-genuine ink. The use of
non-genuine ink may cause damage that is not covered by Epson’s
warranties, and under certain circumstances, may cause erratic
printer behavior.
Caution:
Leave your old cartridges in the printer until
you are ready to replace them to prevent the print head nozzles
from drying out. Do not open ink cartridge packages until you are
ready to install the ink. Cartridges are vacuum packed to maintain
reliability. If you see a message to replace the White or Metallic
Silver ink cartridges (SC-S80600), replace the ink cartridge
immediately or you could damage the print head.
- Lift the lock lever for the cartridge that needs replacing.
- Insert
your finger into the depression on top of the ink cartridge and
pull the cartridge straight out.
Caution:Be careful handling the ink cartridge as there may be ink around the ink supply port.Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right away. Keep ink cartridges out of the reach of children.
- Remove
the new cartridge from the package. Then gently shake the cartridge
for about 15 times within five seconds. If you are replacing an
Orange, White, or Metallic Silver ink cartridge, shake it about 50
times within 15 seconds.
Note: Do not touch the green chip on the cartridge.
- Make sure the labels on the cartridge and product match, then insert the cartridge into the slot.
- Lower
the lock lever.
Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it.
