The print start positions determine where printing begins on the
right and top sides of your media.
The print start position for the right side of the media is
dependent on the Media Size Check
setting from the Printer Setup menu.
When the
Media Size Check setting is turned
on, the print start position is approximately 0.4 inch (10 mm)
from the right edge of the media when using the media edge plates,
and 0.2 inch (5 mm) when not using the media edge plates.
1
0.2 inch (5 mm)
2
0.2 inch (5 mm)
Note: You can
adjust the print start position by changing the Print Start Position or Side Margin (Right) settings in the Printer Setup menu.
When the
Media Size Check setting is turned
off, the print start position is indicated on the after heater.
Top Print Start Position
The print start position of the leading edge of your
media is approximately 3.6 inches (92 mm) from the cutter groove
toward the inside of the printer as shown.