Depending on how you plan to use the projector, you may need to obtain additional components.
Unless listed as available from Epson in this table, see your local computer or electronics dealer for purchase information.
| Signal or connection type | Additional component necessary |
|---|---|
| Component video | D-sub, 15-pin, component-to-VGA video cable and two VGA
computer cables
Available for purchase from Epson or an authorized Epson reseller. You also need a splitter that supports component video signals (commercially available). |
| HDMI | Three compatible HDMI cables
Available for purchase from Epson or an authorized Epson reseller. You also need a splitter that supports HDMI signals (commercially available). Note: Older
Mac computers (2009 and earlier) may not support HDMI
audio. |
| 3D | Three compatible HDMI cables, a splitter that supports
3D signals, and a silver screen (recommended gain: 2.3 to 2.7)
You can purchase HDMI cables from Epson or an authorized Epson reseller. Note: If your
video source is a 3D Blu-ray disc, you also need a Blu-ray player
that supports 3D playback. See your local computer or electronics
dealer for purchase information. |
| Audio from certain ports | Commercially available audio cable compatible with your device |
| VGA | Two VGA computer cables
Available for purchase from Epson or an authorized Epson reseller. If you want to connect the projector using a splitter, you also need a splitter that supports VGA signals (commercially available) and a third VGA computer cable. |
| BNC | VGA-to-5-BNC cable or adapter
Available for purchase from Epson or an authorized Epson reseller. |
| DVI-D | Compatible DVI-D cable |
| HDBaseT | Compatible 100Base-TX LAN cable |
| Control pad | To power the control pad from the projector, you need
the remote control cable set (ELPKC28).
Available for purchase from Epson or an authorized Epson reseller. |