Categories on the status display screens let you view information about the projector and its operation.
Status Information category
| Information | Description |
|---|---|
| System | See the System status information table at the end of this topic |
| Source | Displays the source currently being used |
| On-Screen Display | Displays the settings for on-screen displays. When turned off, menus or messages are not displayed on the projected images |
| A/V Mute | Displays the A/V Mute status |
| Air Temp | Displays the environmental temperature |
| Temp Level | |
| Lamp Status | Display the operating status of the lamp |
Source category
| Information | Description |
|---|---|
| Source | Displays the source currently being used |
| Resolution | Displays the resolution of the current input signal |
| Video Signal | Displays the current input video signal |
| Color Space | Displays the color space of the current input signal |
| H-Frequency | Displays the horizontal frequency of the current input signal |
| V-Frequency | Displays the vertical frequency of the current input signal |
| Sync Polarity | Displays the sync polarity |
| Sync Mode | Displays the sync type |
| Detected Mode | Displays the detected mode of the current input signal |
| Video Level | Displays the video level of the projector |
Signal Information category
| Information | Description |
|---|---|
| 5V Detection | Displays the detection results of 5V signals |
| TMDS Clock | Displays the TMDS frequency of the current input signal |
| TMDS H-Frequency | Displays the horizontal frequency of the current input signal |
| TMDS V-Frequency | Displays the vertical frequency of the current input signal |
| DetChg 5CFHMP123 | Displays the factors of signal changes |
| Stable Time | Displays the amount of operating time since the input source was determined |
| HDCP Status | Displays the HDCP status |
| HDCP Ver | Displays the HDCP version |
| AVI Info VIC | Displays the VIC information (AVI) of the current input signal |
| AVI InfoChecksum | Displays the checksum result for AVI |
| Signal Mode | Displays the signal mode |
| Pixel Encoding | Displays the color space information (AVI) of the current input signal |
| HDBaseT Quality | Displays the image signal information from the HDBaseT port |
Network Wired category
| Information | Description |
|---|---|
| Projector Name | Displays the name used to identify the projector when connected to a network |
| Connection Mode | Displays the connection path for the LAN |
| DHCP | Displays the DHCP display settings |
| IP Display | Displays the IP address display settings |
| IP Address | Displays the IP address |
| MAC Address | Displays the MAC address |
Network Wireless category
| Information | Description |
|---|---|
| Projector Name | Displays the name used to identify the projector when connected to a network |
| Connection Mode | Displays the connection mode to use when connecting the projector and a computer over a wireless LAN |
| SSID Display | Displays the SSID display settings |
| IP Display | Displays the IP address display settings |
| SSID | Displays the SSID |
| IP Address | Displays the IP address |
| DHCP | Displays the DHCP settings |
| MAC Address | Displays the MAC address |
| Security | Displays the security settings |
| Antenna Level | Displays the reception status for Wi-Fi |
Maintenance category
| Information | Description |
|---|---|
| Operation Time | Displays the projector's total operation time |
| Lamp Op. Time | Displays the lamp operating time (Normal) |
| Lamp Op. Time PR | Displays the lamp operating time (Portrait Mode) |
Version category
| Information | Description |
|---|---|
| Serial No. | Displays the projector's serial number |
| Main | Display the projector's firmware version information |
| Video2 | |
| Sub | |
| Sub2 | |
| HDBaseT |
System status information
| Status | Description |
|---|---|
| OK | The projector is in normal operating mode |
| Warm-up | The projector is warming up |
| Standby | The projector is in standby mode |
| Cool Down | The projector is cooling down |
| Temp Error | A high temperature error occurred |
| Fan Error | A fan error occurred |
| Sensor Error | A sensor error occurred |
| Lamp Error | A lamp error has occurred |
| Lamp Failure | A lamp failure has occurred |
| Power Error | A power error occurred |
| Internal Error | An internal error occurred |
| Auto Iris Error | An Auto Iris error has occurred |
| Airflow Error | A filter airflow error occurred |
| Temp Warning | A high temperature warning occurred |
| Internal Warning | A warning regarding the internal system occurred |
| Airflow Decline | A low airflow error occurred |
| Lamp Warning | A lamp warning occurred |
| Power Warning | A power warning has occurred |
| Direction Warning | The usage angle is out of range |
| Lamp Replacement | A lamp replacement recommendation has occurred |
| Clean Filter | An air filter notice occurred; clean the air filter |