You can
enable Wi-Fi Direct mode to allow direct communication between your
product and computer or other devices without a wireless router or
access point.
- Press the
home button, if
necessary. - Select
Setup.
- Scroll down and select Network Settings.
- Select Wi-Fi Setup. You see this screen:
- Scroll down and select Wi-Fi Direct Setup.
- Select Connection Setup.
- Select Change Password
and select Yes.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will be disconnected when you change the password.
- Enter a Wi-Fi Direct password using the displayed
keyboard.
Note: Your password must be at least 8 and no more than 22 characters long.
- Press
when you’re
finished entering your password. You see this screen:
- Scroll down to view the SSID (Wi-Fi network name) and password.
- Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the LCD screen, then enter the password shown.
- Press the home button to return to the Home
screen. You see an AP
connection symbol on the LCD screen and should be able to print
directly to your product from your computer or device.
Note: If the AP connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again.
