Projector Feature Settings - Settings Menu

Options on the Settings menu let you customize various projector features.



Setting Options Description
Geometry Correction H/V-Keystone

Quick Corner

Curved Surface

Corner Wall

Point Correction

Memory

Adjusts the projected image shape

H/V Keystone: lets you manually correct the angles of the horizontal and vertical sides

Quick Corner: select to adjust the position of the four corners

Curved Surface: select to adjust the image when projecting on a curved surface

Corner Wall: select to adjust the image when projecting on a surface with a right angle

Point Correction: select to display a grid and finely adjust the image position

Memory: select to save adjustment value of the geometric correction and load it when needed

Split Screen Divides the viewing area horizontally and displays two images side-by-side; while in Split Screen mode, press Menu to display the Split Screen options or Esc to cancel split screen display
Volume Varying levels available Adjusts the volume of the projector’s speaker system
Lock Setting Control Panel Lock

Lens Lock

Controls projector button locking to secure the projector
Control Panel Lock:
  • Full Lock: locks all buttons
  • Partial Lock: locks all buttons except the power button
  • Off: no buttons locked

Lens Lock: locks the focus, zoom, and lens shift settings

Brightness Settings Light Source Mode

Brightness Level

Constant Brightness

Estimated Remains

Selects the brightness mode of the projector
Light Source Mode: sets the brightness for the light source
  • Normal: maximum brightness
  • Quiet: 70% brightness with reduced fan noise
  • Extended: 70% brightness and extends the life expectancy of the light source
  • Custom: select a custom brightness level

Brightness Level: select the Custom brightness level you want1

Constant Brightness: maintains a constant brightness; enabling this setting prevents you from changing the Light Source Mode and Brightness Level settings1

Estimated Remains: displays how long the projector can maintain constant brightness2

Remote Receiver Front/Rear

Front

Rear

Off

Limits reception of remote control signals by the selected receiver; Off turns off all receivers
User Button User1

User2

User3

Assigns a menu option to the User1, User2, and User3 buttons on the remote control for one-touch access
Test Pattern Displays a test pattern to assist in adjusting the image; press the left or right arrow buttons on the remote control or Enter on the control panel to cycle through the available test patterns, or Esc to cancel pattern display
Memory Load Memory

Save Memory

Erase Memory

Rename Memory

Save customized sets of settings to memory

1 Available only when the Light Source Mode setting is set to Custom.

2 Available only when the Light Source Mode setting is set to Custom and the Constant Bright setting is set to On.

Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use