Controlling a Networked Projector Using a Web Browser

Once you have connected your projector to your network, you can select projector settings and control projection using a compatible web browser. This lets you access the projector remotely.
Note: The web setup and control features support Microsoft Internet Explorer 9.0 or later, and Safari on networks that do not use a proxy server for connection. You cannot select all of the projector menu settings or control all projector functions using a web browser.
Note: If you set Standby Mode to Communication On, you can use a web browser to select settings and control projection even if the projector is in standby mode.
  1. Make sure the projector is turned on.
  2. Start your web browser on a computer or device connected to the network.
  3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
    Note: You may need to log in before you see the Web Control screen. If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and the default password is admin.)
    You see the Web Control screen.


    1 Select Basic Control to control the projector remotely.
    2 Select OSD Control Pad to change the projector's menu settings.
    3 Select Test Pattern to display a test pattern
    4 Select Advanced to open the advanced menu screen.
    5 Select Status Information to view the projector's status.
    6 Select Lens Control to adjust the lens (focus, zoom, and lens shift).
  4. Select the option corresponding to the projector function you want to control.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use