Scanning to Network Computers from the Network Interface Unit - Windows

You can scan to a network computer directly from the Epson Network Interface Unit (Windows). You first set up a scan job in Document Capture Pro and then select the computer you want to send the scanned file to.
Note: If you installed the Epson ScanSmart software (ES-500W/ES-500WR), pressing the OK button on the Epson Network Interface Unit starts Epson ScanSmart instead. For instructions on scanning with Epson ScanSmart, see the help information in Epson ScanSmart or click here to access the Epson ScanSmart User's Guide.
Note: Make sure your scan job settings are set up correctly in Document Capture Pro before scanning with the Epson Network Interface Unit.
  1. Press the OK button on the Epson Network Interface Unit.
  2. On the LCD screen of the Epson Network Interface Unit, select the computer you want to send the scanned file to and press the OK button.
    Note: If your scanner is part of a network group, make sure to set the computer to the same network group or it will not appear on the LCD screen.
  3. If you set up a password in Document Capture Pro, enter the password at the prompt.
  4. Select a scan job and press the OK button on the Epson Network Interface Unit.
  5. Press the  start button on the scanner or Epson Network Interface Unit. Your original is scanned and the file is sent to the computer you selected.