Cleaning the Flatbed Scanner Dock

To keep your product working at its best, you should clean it several times a year.
Caution:
Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it. Do not use oil or other lubricants inside the product or let water get inside it. Do not open the product case.
  1. Turn off the document scanner using the  power button.
    Note: There is no power button on the flatbed scanner.
  2. Unplug the AC power cord and disconnect the USB cable that connects the flatbed scanner dock to the computer.


  3. Clean the outer case with a cloth dampened with mild detergent and water.
  4. If the scanner glass is dirty, clean it with a soft dry cloth. If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner on a soft cloth to remove it. Wipe off all remaining liquid.
    Caution:
    Do not spray glass cleaner directly on the scanner glass. Do not press the surface of the scanner glass with any force and be careful not to scratch or damage the scanner glass. A damaged glass surface can decrease the scan quality.