Depending
on the length of your originals, you may need to adjust the
position of the input tray, output tray, and stopper when scanning
from the document scanner's ADF with the optional flatbed scanner
dock attached.
For originals shorter than 8.2 inches (210 mm)
long):
- Open the document scanner's input tray, pull out the output tray and output tray extension, and open the stopper.
- Extend the output tray a little longer than the length of the original and move the stopper forward or backward as necessary.
For originals between 8.2 inches and 11.7 inches
(210 mm to 297 mm) long:
- Open and extend the document scanner's input tray, open the flatbed scanner's stopper, and slide the stopper forward or backward so that it is a little longer than the length of the original. (Do not open the output tray on the document scanner.)
