Pairing the 3D Glasses with the Projector
Pair the glasses with the projector to establish communication between them for 3D viewing.
Turn on the projector.
Set the image source to HDMI on the projector.
Project a 3D image.
Slide the power switch on the 3D glasses to the
On
position.
Move the glasses within 10 feet (3 m) of the projector and hold down the
Pairing
button for at least three seconds.
The status light on the glasses flashes green and red. If pairing is successful, the light turns green for 10 seconds and then turns off.
Parent topic:
Viewing 3D Images
Was this page helpful?
Yes
or
No
.
Privacy Policy
|
Your California Privacy Rights
|
Terms of Use