Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Note: When using the Blank feature, the projector lamp is still on. To turn off the lamp, turn off the projector.
  1. Press the power button on the projector or the Standby button on the remote control.
    The projector displays a shutdown confirmation screen.


  2. Press the power button on the projector or the Standby button on the remote control again. (To leave it on, press any other button.) The lamp turns off and the lens shutter closes. The projector's status light flashes and then turns off.
  3. To transport or store the projector, make sure the status light is off, then unplug the power cord.


    Caution:
    To avoid damaging the projector or lamp, never unplug the power cord when the status light is on or flashing.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use