Using Picture in Picture

You can use Picture in Picture mode to view two image sources simultaneously.
Note: You can display only HDMI or WirelessHD (PowerLite Home Cinema 5040UBe) video sources when using Picture in Picture mode. You cannot use Picture in Picture while projecting 3D or 4K images.
  1. Turn on the projector and switch to the HDMI or WirelessHD image source you want to use.
  2. Press the P-in-P button on the remote control.


    The second HDMI video source appears as a sub-screen in the corner of the image.
    Note: While Picture in Picture mode is active, press the Menu button on the remote control to adjust the size and position of the sub-screen.
  3. To swap the main screen and sub-screen video sources, press and hold the P-in-P button for at least three seconds.
  4. Press the P-in-P button again to close the sub-screen and resume normal projection.
Parent topic: Adjusting Projector Features
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use