Battery Safety Instructions
(ES-300W/ES-300WR)
- The battery is not fully charged at the time of purchase.
Charge the battery fully before using the scanner on battery
power.
- Always charge the battery within a temperature range of 46°F to
95°F (8°C to 35°C). The battery cannot charge or may deteriorate if
you charge it in an environment outside of this range.
- If the
battery is not fully charged within the specified time, stop
charging. Otherwise, the battery could become hot, emit smoke,
rupture, or catch fire.
- If you are not using the scanner, charge the battery using the
AC adapter on a regular basis (at least once every six months) to
avoid letting the battery run out.
- Turn off the scanner when not in use or set the scanner to turn
off automatically to save battery power.
- Do not place the product in a microwave oven or a high-pressure
container. Otherwise, the battery could become hot, emit smoke,
rupture, or catch fire.
- If battery
acid gets into your eyes or on your skin, immediately rinse the
affected area thoroughly with water and seek medical
treatment.
- If battery
acid leaks from a battery, or the product emits a bad odor, move
the product away from flammable objects immediately. If the product
is not moved, electrolytes leaking from the battery become hot,
emit smoke, rupture, or catch fire.
- Do not
subject the scanner to physical impacts or drop the scanner.
Otherwise, the battery could leak or the protection circuit in the
battery could be damaged. As a result, the battery could become
hot, emit smoke, rupture, or catch fire.
- Do not use or place the product in temperatures exceeding 140°F
(60°C), such as near a fire or a heater. Otherwise, the plastic
separator could melt and the individual cells could short-circuit.
As a result, the battery could become hot, emit smoke, rupture, or
catch fire.
- Do not use the product if it is leaking or damaged in any way.
Otherwise, the battery could become hot, emit smoke, rupture, or
catch fire.
- Do not leave the product in a vehicle. Otherwise, the battery
could overheat.
- If the scanner's
battery
light flashes orange quickly during charging in the normal
temperature range (46°F to 95°F [8°C to 35°C]) or the battery runs
out too fast even on a full charge, the battery may be
malfunctioning or at the end of its service life. Contact Epson
support to replace the battery.