If you have problems feeding originals in your scanner, try
these solutions:
If multiple
pages feed at once, try the following:
Remove the
originals, fan the edges to separate the sheets, if necessary, and
reload them.
Load fewer originals at a time.
Load only
originals that meet the specifications for your scanner.
Make sure the number of originals does not exceed the scanner's
loading capacity. If loading a stack of originals, slide the stack
so the leading edge is at an angle, as described in the loading
instructions.
Clean inside
the scanner and replace the roller assembly kit, if necessary.
Scan the originals one by one using the Automatic Feeding Mode setting in Epson Scan
2.
Use Automatic Feeding Mode in
Epson Scan 2 and scan originals one at a time.
If you see a double feed error in the Epson Scan 2 window or
the Document Capture Pro window, start Epson Scan 2, select the
Main Settings tab, select the
Detect Double Feed setting, and
select Off.
Note: On a Mac,
only Epson Scan 2 displays double feed errors. Document Capture for
Mac does not include this setting.