You can
load originals that meet the document specifications in the input
tray.
Slide
the cover latch to open the scanner.
Press the power button to turn on the
scanner, if necessary.
Extend the paper guide.
Note: If you are
loading an original that is 14.5 inches (368.3 mm) or longer, do
not extend the paper guide.
Raise
the input tray edge guides and slide them all the way out.
If you
are loading a multi-page original, fan your stack of
originals.
Note: If you are
loading an original that is 14.5 inches (368.3 mm) or longer, load
only one sheet at a time.
Stack the originals with the printed
side facing down and slide the stack so the leading edge is at an
angle as shown.
Slide
the mode selector to ADF and load standard originals into
the input tray printed side down and top edge first. Slide in the
originals until they meet resistance and the ready light becomes
brighter.
Slide
the edge guides against the edges of the original.
Note: If you are
scanning originals that are 14.5 inches (368.3 mm) or longer,
support the original as it enters into and ejects from the scanner
as shown.