Focusing the Image Using the Focus Button

You can adjust the sharpness of the projected image using the focus buttons
Note: Wait 20 minutes after turning on the projector before setting the focus, zoom, and lens shift for maximum accuracy. If you installed any of the following lenses, see the section on focusing with a short throw lens instead: ELPLR05 or ELPLU05.
  1. Turn on the projector and display an image.
    Note: If you are projecting from multiple projectors that differ in brightness, display a grayscale test pattern to adjust the focus for best results.
  2. Press the Focus/Distortion button on the control panel.


  3. Press the left and right arrow buttons to adjust the focus.
  4. Press the Esc button when finished.
Note: You can also press the Focus + or buttons on the remote control to adjust the focus.


Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use