Settings on the Extended menu let you customize various projector setup features that control its operation.
Display settings
Setting | Description |
---|---|
Menu Position | Selects the position of the projector menu displayed on the screen |
Message Position | Selects the position of messages displayed on the screen |
Messages | Controls whether messages are displayed on the screen |
Display Background | Selects the screen color or logo to display when no signal is received |
Startup Screen | Controls whether a special screen appears when the projector starts up |
Standby Confirmation | Displays a confirmation message after pressing the Standby button on the remote control |
Air Filter Notice | Displays a message when a clog in the air filter is detected |
Screen | Sets the aspect ratio and position of the projected image according to the type of screen being used |
Panel Alignment | Corrects color misalignment in the projected image |
Color Uniformity | Adjusts the color tone balance |
OSD Rotation | Rotates the menu display 90° |
Operation settings
Setting | Description |
---|---|
Direct Power On | Turns on the projector when you plug it in |
Sleep Mode | Automatically places the projector in standby mode after an interval of inactivity |
Sleep Mode Timer | Sets the time before the projector automatically turns off (Sleep Mode must be turned on) |
High Altitude Mode | Regulates the projector’s operating temperature at altitudes above 4921 feet (1500 m) |
Startup Source Search | Automatically detects the image signal being input when the projector is turned on |
Auto Power On | If Computer or BNC is selected, the projector turns on when it detects an input signal from that port |
Shutter Settings | Adjusts the shutter settings
Fade-in: sets the number of seconds for a fade-in transition effect when displaying an image Fade-out: sets the number of seconds for a fade-out transition effect when hiding an image Shutter Timer: turns off the projector automatically after using the shutter and 2 hours of inactivity has passed Shutter Release: select Shutter if you want to use only the Shutter button to turn off the shutter, or select Any Button to use any button to turn it off |
Advanced | See the next table in this topic |
Date & Time | Adjusts the projector's time and date settings |
Lens Calibration | Displays information about the lens currently in use |
Advanced settings
Setting | Description |
---|---|
BNC Sync Termination | Sets the termination for the signal from the BNC port (set to Off unless you need analog termination, such as for switchers) |
Beep | Controls the beep that sounds when you turn the projector on or off |
Indicators | Select Off to turn off projector lights, except warning lights |
Instant Off | Select Enabled to place the projector in standby mode after turning it off, or Disabled to place the projector in standby mode approximately 75 seconds after turning it off |
Inv Direction Button | Enable this setting if you installed the projector on a ceiling and want to invert the direction of the arrow buttons on the control panel |
HDMI DDC Buffer | If you are projecting using an HDMI extension cable and the image is not displayed correctly, enabling this setting may improve image quality |
DVI-D DDC Buffer | If you are projecting using a DVI extension cable and the image is not displayed correctly, enabling this setting may improve image quality |
AC Voltage Monitoring | If you select On for this setting and the projector is turned off by any method other than pressing the power button, a power supply voltage warning message is displayed the next time the projector is turned on |