This projector is a Class 3R
laser product that complies with the IEC60825-1 international
standard for lasers. Follow these safety instructions when using
the projector.
- If an
error occurs in the projector, turn off the power and unplug the
projector immediately. Continuing to use the projector could result
in an electric shock, fire, or visual impairment. Contact Epson
support.
- Do not
attempt to disassemble or modify the projector. The projector
contains a high-power laser component. Serious injury could
result.
- Do not
look into the lens during projection. Also, do not look into the
lens using optical devices, such as a magnifying glass or
telescope. This could cause visual impairment.
- When
turning on the projector at a distance using the remote control,
make sure no one is looking into the lens.
- Do not
allow small children to operate the projector. Children must be
accompanied by an adult.
- Do not
apply optical devices, such as a magnifying glass or reflector, to
the projected image. Using the projector may result in physical
harm, fire, or an accident.
- Before
using the projector, make sure there is nothing in the area that
could reflect the projected image.
- When
disposing of the projector, do not disassemble it. Dispose of the
projector in accordance with your local or national laws and
regulations.
Labels are attached to the projector to indicate it
is a Class 3R product and complies with FDA performance standards
for laser products except for deviations pursuant to Laser Notice
N. 50, dated June 24, 2007: