The  power light is on |
The product is turned on. |
| The power light is
flashing |
The product is busy. Wait for the
power light to stop
flashing before turning off the product. |
The  paper light is
flashing |
Paper is jammed in the product. Remove the
jammed paper, and press the  B&W copy button or
the  color copy button to
clear the error. |
|
The paper light is on
|
No paper is loaded or multiple sheets fed at
one time. Load paper in the product, and press the B&W copy button or
the color copy button to
clear the error. |
| The power light is on
The  ink light is on |
Initial ink charging may not be complete. See
the Start Here poster for instructions. |
| The ink light is flashing
The paper light is
flashing |
The ink pads need to be replaced. You must
contact Epson for support. |
|
The ink light is on
The paper light is on
|
An error has occurred during firmware updating.
Connect your product using a USB cable and try updating the
firmware again. If the error continues, contact Epson for
support. |
| The power light is flashing
The ink light is
flashing
The paper light is
flashing |
Open the scanner unit and remove any paper or
protective materials inside the printer. Turn the product off and
then back on again. |
