Attaching and Removing the HDMI Cable Clips
You can install the HDMI cable clips that came with your projector to provide additional support to the HDMI cables that you connect.
Plug in the HDMI cable.
Insert the end of the cable clip anchor into the cable clip slot near the
Place the open cable clip around the HDMI cable, but don't lock it into place.
Slide the cable clip onto the anchor and lock the clip onto the HDMI connector.
Repeat these steps for the second cable clip, if necessary.
To remove a cable clip, open the clip and disconnect the HDMI cable. Then pinch the sides of the cable clip anchor and carefully pull it out of the cable clip slot.
Connecting to Video Sources
Was this page helpful?
Your California Privacy Rights