| Blue |
Blue |
Off |
Off |
Normal operation |
| Blue |
Flashing blue |
Off |
Off |
Warming up; wait for an image to appear
or
Shutting down; when the status light stops flashing,
you can unplug the projector |
| Off |
Off |
Off |
Off |
Standby or sleep mode |
| Blue |
Off |
Off |
Off |
Standby mode (with Communication On) |
| Flashing blue |
Varies |
Varies |
Flashing orange |
Projector is too hot
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects
- Clean or
replace the air filter
- Make sure
the environmental temperature is not too hot
|
| Off |
Flashing blue |
Off |
Orange |
Projector has overheated and turned off; leave it
turned off until it cools down, then do the following:
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects
- Clean or
replace the air filter
- If the
problem persists, unplug the projector and contact Epson for
help
|
| Off |
Flashing blue |
Orange |
Off |
Laser has a problem or failed to turn on
- Clean or
replace the air filter
- If
operating the projector at high altitude, turn on High Altitude Mode
- If the
problem persists, unplug the projector and contact Epson for
help
|
| Off |
Flashing blue |
Off |
Flashing orange |
A fan or sensor has a problem; turn the projector off,
unplug it, and contact Epson for help |
| Off |
Flashing blue |
Flashing orange |
Flashing orange |
Cinema filter, static iris, or lens shutter error; turn
the projector off, unplug it, and contact Epson for help |
| Off |
Flashing blue |
Orange |
Orange |
Laser driver error; turn the projector off, unplug it,
and contact Epson for help |
| Off |
Flashing blue |
Flashing orange |
Off |
Internal projector error; turn the projector off,
unplug it, and contact Epson for help |
| Flashing blue |
Flashing blue |
Flashing orange |
Flashing orange |
Fatal error; turn the projector off, unplug it, and
contact Epson for help |
