Installing the Wireless LAN Module

To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module (PowerLite 975W/2055/2065/2155W/2165W/2245U/2250U/2255U/2265U). Do not install any other type of wireless LAN module.
Note: The wireless LAN module is optional for the PowerLite 2040/2140W/2250U.
Never remove the module while its indicator light is blue or flashing, or while you are projecting wirelessly. You may damage the module or lose data.
  1. Turn off the projector and unplug the power cord.
  2. Slide the air filter cover latch and open the air filter cover.

  3. Remove the screw securing the wireless LAN module stopper, then remove the stopper.

  4. Insert the wireless LAN module into the port.

  5. Replace the wireless LAN module stopper and secure it using the screw you removed.

  6. Close the air filter cover.
  7. Plug in and turn on the projector.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use