You can set
up the projector to send you an e-mail alert over the network if
there is a problem with the projector.
Press the Menu
Select the Network menu
and press Enter.
Configuration and press Enter.
Select the Notifications
menu and press Enter.
Turn on Mail
Enter the IP address for the SMTP Server setting.
enter the IP address using the numeric keys on the remote control,
press and hold the Num button. Do
not use these addresses: 127.x.x.x or 188.8.131.52 through
255.255.255.255 (where x is a number from 0 to 255).
Select a number for the SMTP server Port Number setting, from 1 to 65535 (default
Enter the sender's email
address as the From
Choose an Address field,
enter the e-mail address, and select the alerts you want to receive
there. Repeat for up to three addresses. Your e-mail address can be
up to 32 alphanumeric characters long.
If you are using the
PJLink protocol for projector control, turn on the PJLink Notification setting and enter the IP
address where you want to receive PJLink notifications as the
Notified IP Address
When you finish selecting settings, select Complete and follow the on-screen
instructions to save your settings and exit the menus.
Note: If a
critical problem causes a projector to shut down, you may not
receive an e-mail alert.