can project from computers on your network, you must select the
network settings for the projector using its menu system.
sure you already connected the projector to your wired network
using the LAN port.
Turn on the projector.
Press the Menu
Select the Network menu
and press Enter.
Configuration and press Enter.
Select the Basic menu
and press Enter.
Select the following basic options as necessary:
Projector Name lets you enter a name up to 16
alphanumeric characters long to identify the projector over the
PJLink Password lets you enter a password up
to 32 alphanumeric characters long for using the PJLink protocol
for projector control.
Password lets you enter a password up to 8 alphanumeric
characters long for accessing the Remote or Basic Control screen in
Epson Web Control. (Default user name is EPSONREMOTE; default password is guest.)
Web Control Password lets you enter a
password up to 8 alphanumeric characters long for accessing the
projector over the web. (Default user name is
EPSONWEB; default password is
Password lets you enter a password up to 4 numbers long for
accessing the projector as a moderator using EasyMP Multi PC
Projection or the Epson iProjection app. (No default
Keyword lets you turn on a security password to prevent
access to the projector by anyone not in the room with it. You must
enter a displayed, randomized keyword from a computer using the
EasyMP Multi PC Projection software to access the projector.
Display LAN Info lets you select how the
projector displays network information. You can select an option to
display a QR code that lets you quickly connect your iOS or Android
devices using the Epson iProjection app.
Note: Use the
displayed keyboard to enter the name, passwords, and keyword. Press
the arrow buttons on the remote control to highlight characters and
press Enter to select
Select the Wired LAN
menu and press Enter.
If necessary, select IP
Settings and press Enter.
Select your IP Settings as necessary:
network assigns addresses automatically, turn on the DHCP setting.
If you must
set addresses manually, turn off DHCP and enter the projector's IP Address, Subnet
Mask, and Gateway Address
highlight the numbers you want from the displayed keyboard, press
the arrow buttons on the remote control. To select a highlighted
number, press Enter.
To prevent display of the IP address on the standby
screen, turn off IP Address
To connect the projector
to the network using IPv6, select On as the IPv6
Settings option. Then select the Auto Configuration and Use Temporary Address settings as
When you finish selecting settings, select Complete and follow the on-screen
instructions to save your settings and exit the menus.