Correcting Image Shape with Arc Correction

You can use the projector's Arc Correction setting to adjust the curve or arc of the sides of your image.
Note: Adjusting the Arc Correction setting may affect interactive pen and finger touch calibration.
  1. Turn on the projector and display an image.
    Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
  2. Press the Menu button.
  3. Select the Settings menu and press Enter.

  4. Select the Geometry Correction setting and press Enter.
  5. Select the Arc Correction setting and press Enter. Then select the Arc Correction setting and press Enter again. You see the Arc Correction adjustment screen.

    Note: To reset your adjustments, press the Esc button for at least 2 seconds to display a reset screen, and select Yes.
  6. Use the arrow buttons on the projector or the remote control to select the corner or side of the image you want to adjust. Then press Enter.
  7. Press the arrow buttons to adjust the image shape as necessary.
  8. When you are finished, press Esc.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use