Connecting a Microphone

You can connect a microphone to the projector's Mic port to provide audio support during presentations .
Note: If you want to output audio from the microphone when the projector is turned off, you need to select Communication On as the Standby Mode setting and Always On as the A/V Output setting in the projector's menu system. Plug-in power is not supported.
  1. Connect the microphone cable to the projector's Mic port.

  2. Turn on the microphone, if necessary.
  3. If you hear a crackling noise or the volume is too high or low, adjust the Mic Input Level setting in the Settings menu.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use