Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Note: When using the A/V Mute feature, the projector lamp is still on. To turn off the lamp, turn off the projector.
  1. Press the power button on the projector or the remote control.
    The projector displays a shutdown confirmation screen.


  2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the Status light turns off.
    Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary).
    Caution:
    Do not turn the projector on immediately after turning it off. Turning the projector on and off frequently may shorten the life of the lamp.
  3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.


    Caution:
    To avoid damaging the projector or lamp, never unplug the power cord when the Status light is on or flashing.
    Note: Do not unplug the power cord while projecting or data on the whiteboard may be lost. If the Auto Delete Saved Data setting is set to Retain in the Extended menu, you can select whether or not to clear the data on the whiteboard when you turn off the projector.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use