The Touch Unit enables finger touch interactivity with
your projector. Do not connect it to any other projectors or
devices.
A built-in, high-power laser is emitted from the
laser diffusion ports on the back of the Touch Unit.
Follow these precautions when using the Touch Unit and
finger touch interactivity:
- Children
using finger touch interactivity should always be accompanied by an
adult.
- Never
disassemble or modify the Touch Unit. Never open any cases on the
projector or Touch Unit. Electrical voltages inside the projector
can cause severe injury.
- Do not look
into the laser diffusion ports on the back of the Touch Unit. The
laser can damage your eyes. Extra care should be taken when
children are present.
- Do not allow
the laser light from the Touch Unit to pass through or be reflected
by any optical devices, such as a magnifying glass or mirror. This
could cause personal injury or fire.
- Do not view
the laser light from the Touch Unit using an optical device such as
an eye loupe, magnifying glass, or microscope, especially within
2.75 inches (70 mm) of the laser diffusion ports. This could damage
your eyes.
- Unplug the
projector from the electrical outlet and refer all repairs to
qualified service personnel if any problems occur with the Touch
Unit. Continued use of the Touch Unit may result in fire or
accidents, and can also damage your eyes.
The Touch Unit is a Class 1 laser product that
complies with IEC/EN60825-1:2007. The labels indicating the Class 1
laser product and warnings are located in the following areas on
the Touch Unit: