| Setting | Options | Description |
|---|---|---|
| Connection Mode | Quick
Advanced |
Selects the type of wireless connection:
Quick: lets you directly connect to multiple devices and computers using the projector's wireless network. For computers, use Easy MP Multi PC Projection to use this mode. Advanced: lets you connect to multiple devices and computers via a wireless network access point |
| Search Access Point | To Search View | Search for available wireless network access points in Advanced connection mode |
| SSID | Up 32 alphanumeric characters | Sets the SSID (network name) of the wireless LAN system the projector is connecting to |
| Security | Open
WPA2-PSK WPA/WPA2-PSK WPA2-EAP WPA/WPA2-EAP |
Selects the type of security used on the wireless
network
WPA2-PSK: uses WPA2 security with AES for encryption. Use the Passphrase value to establish a connection from a computer WPA/WPA2-PSK: uses WPA personal mode; encryption is dependent on the access point settings; Passphrase must be the same as the access point WPA2-EAP: uses WPA2 security and AES for encryption WPA/WPA2-EAP: uses WPA enterprise mode; encryption is dependent on the access point settings |
| Passphrase | Various passphrases from 8 to 32 characters (from a web browser, the maximum is 63 characters) | Selects the pre-shared key used on the network; passphrases are case-sensitive. If the network settings are reset after the passphrase has been changed more than once, the first passphrase is restored. |
| EAP Method | EAP Type
User name Password Client Certificate Verify Server Cert. CA Certificate RADIUS Server Name |
Sets the EAP settings for WPA2-EAP and WPA/WPA2-EAP security |
| Channel | 1ch
6ch 11ch |
In Quick connection mode, selects the frequency band (channel) used by the wireless LAN |
| IP Settings | DHCP (On or Off)
IP Address Subnet Mask Gateway Address |
Selects DHCP if your network assigns IP addresses automatically, or turns off DHCP so you can enter the network's IP address, subnet mask, and gateway address as needed |
| SSID Display | On
Off |
Selects whether to display the SSID on the network standby screen and Home screen |
| IP Address Display | On
Off |
Selects whether to display the IP address on the network standby screen and Home screen |