select Screen Mirroring settings for your projector and then
project images from your mobile device.
Press the Menu
Select the Network menu
and press Enter.
Select On as the
Select Screen Mirroring
Settings and press Enter.
To enter a name for the
projector, select Display Name.
You can enter up to 32 alphanumeric characters.
Select Basic or Extended as the Operation Mode setting.
Select Basic and select
these settings as necessary:
Wireless LAN Sys. lets you select the type of
wireless LAN system the projector is connected to.
Adjust Image Quality lets you adjust the
screen mirroring speed/quality. Select a small number to improve
the quality and select a large number to increase the speed.
Connection Mode lets you select the type of
WPS (Wi-Fi Protected Setup) you are using.
Select Extended and select these settings as
necessary (The Extended setting
is only available if you select Extended as the Operation Mode setting.):
Mode lets you select whether to allow other devices to
connect while using Screen Mirroring. Select No Interruptions to prevent other devices
from connecting while Screen Mirroring is active, or select
Interruptions OK to allow another
device to connect.
lets you select the wireless channel for the Screen Mirroring
Select Display and select these settings as
Code selects whether the PIN code is displayed on the
projected image while projecting from sources other than the Screen
Mirroring source or not.
Name selects whether the connected device name is displayed
on the projected image while projecting from sources other than the
Screen Mirroring source or not.
When you finish selecting settings, select Set and press Enter.