If the pen position is not the same as the mouse
pointer, try the following solutions:
- Make sure
you have calibrated the system. Try manual calibration.
- Make sure
the cable cover is in place to keep cables from blocking the
signal.
- Try
adjusting the pen operation area.
- Turn off any keystone correction and disable the
Quick Corner and Arc Correction settings.
- If you use
the E-Zoom + button on the remote
control to enlarge the image, the pen position is not accurate.
When you return the image to the original size, the position should
be correct.
- In PC Interactive mode (in the Extended > Advanced menu), turn off the Auto Adjust Pen Area setting and select
theManual Adj. Pen Area setting.
(USB cable required)
- Try changing the computer's resolution to 1920 ×
1200.
- Select Reset All Config from the Reset menu
to restore the projector settings to their default values.