| Blue |
Blue |
Off |
Off |
Normal operation. |
| Blue |
Flashing blue |
Off |
Off |
Warming up. Wait for an image to appear. |
| Shutting down. (When the Status light stops flashing,
you can unplug the projector.) |
| Blue |
Off |
Off |
Off |
Standby, sleep mode, or monitoring. |
| Flashing blue |
Off |
Off |
Off |
Preparing for monitoring; all features are
disabled. |
| Blue |
Varies |
Off |
Flashing orange |
Projector is too hot.
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
- Clean or
replace the air filter.
- Make sure
the environmental temperature is not too hot.
|
| Off |
Flashing blue |
Off |
Orange |
Projector has overheated and turned off. Leave it
turned off to cool down. After about five minutes, do the
following:
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
- Clean or
replace the air filter.
- If
operating the projector at high altitude, turn on High Altitude Mode.
- If the
problem persists, unplug the projector and contact Epson for
help.
|
| Off |
Flashing blue |
Orange |
Off |
Lamp has a problem.
- Check to
see if the lamp is burned out, broken, or installed incorrectly.
Reseat or replace the lamp as necessary.
- Clean or
replace the air filter.
- If
operating the projector at high altitude, turn on High Altitude Mode.
- If the
problem persists, unplug the projector and contact Epson for
help.
|
| Flashing blue |
Varies |
Flashing orange |
Varies |
Replace the lamp soon to avoid damage. Do not continue
using the projector. |
| Off |
Flashing blue |
Off |
Flashing orange |
A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help. |
| Off |
Flashing blue |
Flashing orange |
Flashing orange |
Auto Iris error. Turn the projector off, unplug it,
and contact Epson for help. |
| Off |
Flashing blue |
Orange |
Orange |
Power error. Turn the projector off, unplug it, and
contact Epson for help. |
| Off |
Flashing blue |
Flashing orange |
Off |
Internal projector error. Turn the projector off,
unplug it, and contact Epson for help. |
| Off |
Flashing blue |
Orange |
Orange |
Obstacle detection error. A beep sounds, and the
message "For safety purposes remove any obstacles blocking the
lens." is displayed. The projector turns off automatically if no
action is taken.
- Make sure that there are no obstacles interfering
with the projection window. Remove any obstacles.
- Clean the obstacle sensor if there are no
obstacles.
If the problem persists, turn the projector off,
unplug it, and contact Epson for help |
