If the projector does not respond to remote control
commands, try the following solutions:
- Check that
the remote control batteries are installed correctly and have
power. If necessary, replace the batteries.
- Make sure
you are operating the remote control within the reception angle and
range of the projector.
- Make sure
the projector is not warming up or shutting down.
- Check to
see if a button on the remote control is stuck down, causing it to
enter sleep mode. Release the button to wake the remote control
up.
- Strong
fluorescent lighting, direct sunlight, or infrared device signals
may be interfering with the projector's remote receivers. Dim the
lights or move the projector away from the sun or interfering
equipment.
- If
available, turn off one of the remote receivers in the projector's
menu system, or check if all the remote receivers were turned
off.
- If you
assigned an ID number to the remote control to operate multiple
projectors, you may need to check or change the ID setting (feature
not available with all projectors).
- If you
lose the remote control, you can purchase another from an
authorized Epson reseller.