You can
select Screen Mirroring settings for your projector and then
project images from your mobile device.
- Press the Menu button.
- Select the Network menu and press Enter.
- Select On as the Screen Mirroring setting.
- Select Screen Mirroring Settings and press Enter.
- To enter a name for the projector, select Display Name. You can enter up to 32 alphanumeric characters.
- Select Basic or Extended as the Operation Mode setting.
- Select Basic and select
these settings as necessary:
- Wireless LAN Sys. lets you select the type of wireless LAN system the projector is connected to.
- Adjust Image Quality lets you adjust the screen mirroring speed/quality. Select a small number to improve the quality and select a large number to increase the speed.
- Connection Mode lets you select the type of WPS (Wi-Fi Protected Setup) you are using.
- Select Extended and select these settings as
necessary (The Extended setting
is only available if you select Extended as the Operation Mode setting.):
- Meeting Mode lets you select whether to allow other devices to connect while using Screen Mirroring. Select No Interruptions to prevent other devices from connecting while Screen Mirroring is active, or select Interruptions OK to allow another device to connect.
- Channel lets you select the wireless channel for the Screen Mirroring connection.
- Select Display and select these settings as
necessary
- Display PIN Code selects whether the PIN code is displayed on the projected image while projecting from sources other than the Screen Mirroring source or not.
- Display Device Name selects whether the connected device name is displayed on the projected image while projecting from sources other than the Screen Mirroring source or not.
- When you finish selecting settings, select Set and press Enter.
