Image Quality Settings - Image Menu

Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source.

To change settings for an input source, make sure the source is connected and select that source.

Setting Options Description
Color Mode See the list of available Color Modes Adjusts the vividness of image colors for various image types and environments
Brightness Varying levels available Lightens or darkens the overall image
Contrast Varying levels available Adjusts the difference between light and dark areas of the image
Color Saturation Varying levels available Adjusts the intensity of the image colors
Tint Varying levels available Adjusts the balance of green to magenta tones in the image
Sharpness Varying levels available Adjusts the sharpness of image details
White Balance Color Temp.

G-M Correction


Adjusts the overall tint of the image

Color Temp.: sets the color tone based on color temperature

G-M Correction: higher values tint the image blue and lower values tint the image red

Customized: lets you adjust the offset and gain of each color R (red), G (green), and B (blue) individually

Image Enhancement Noise Reduction

MPEG Noise Reduction

Adjusts the image resolution

Noise Reduction: reduces flickering in analog images

MPEG Noise Reduction: reduces the noise or artifacts seen in MPEG video

Advanced Gamma Adjusts the gamma levels of the image. Select Customized to adjust the gamma while viewing the image or a graph.
RGBCMY Adjusts the hue, saturation, and brightness for each color
Deinterlacing Sets whether to convert interlaced-to-progressive signals for certain video image types

Off: for fast-moving video images

Video: for most video images

Film/Auto: for movies, computer graphics, and animation

Auto Iris Off


High Speed

Adjusts the projected luminance based on the image brightness when certain Color Modes are selected

Normal: for standard brightness adjustment

High Speed: to adjust brightness as soon as the scene changes

Note: The Noise Reduction setting is not available if you have selected an interlaced (480i/576i/1080i) input signal.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use