Blue |
Off |
Off |
Off |
Off |
Standby or network monitoring and control (when
Standby Mode is set to
Communication On). |
Blue |
Flashing blue |
Varies |
Off |
Off |
Warming up. Wait for an image to appear. |
Blue |
Blue |
Varies |
Off |
Off |
Normal operation. |
Blue |
Flashing blue |
Off |
Off |
Off |
Cooling down. All control panel buttons are
disabled. |
Flashing blue |
Off |
Off |
Off |
Off |
Preparing for network monitoring or shutting
down. |
Off |
Flashing blue |
Flashing orange |
Off |
Off |
Internal error. Turn off the projector, unplug it from
the electrical outlet, and contact Epson for help. |
Off |
Flashing blue |
Off |
Flashing orange |
Off |
A fan or sensor has a problem. Turn the projector off,
unplug it, and contact Epson for help. |
Off |
Flashing blue |
Off |
Orange |
Off |
Projector has overheated and turned off. Leave it
turned off to cool down for five minutes.
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
- Clean or
replace the air filter.
- If
operating the projector at high altitude, turn on High Altitude Mode.
- If the
problem persists, unplug the projector and contact Epson for
help.
|
Off |
Flashing blue |
Orange |
Off |
Off |
Lamp has a problem.
- Check to
see if the lamp is burned out, broken, or installed incorrectly.
Reseat or replace the lamp as necessary.
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
- If
operating the projector at high altitude, turn on High Altitude Mode.
- If the
problem persists, unplug the projector and contact Epson for
help.
|
Off |
Flashing blue |
Off |
Off |
Orange |
Low air flow through the projector.
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
- Clean or
replace the air filter.
- If the
problem persists, unplug the projector and contact Epson for
help.
|
Off |
Flashing blue |
Flashing orange |
Flashing orange |
Off |
Auto Iris error. Turn off the projector, unplug it
from the electrical outlet, and contact Epson for help |
Off |
Flashing blue |
Orange |
Orange |
Off |
Power error (balast) or Lens Shift error. Turn off the
projector, unplug it from the electrical outlet, and contact Epson
for help |
Flashing blue |
Varies |
Varies |
Flashing orange |
Varies |
High temperature warning. If the temperature gets too
high, projection will automatically stop.
- Make sure that the vents and air filter are not
clogged with dust or obstructed by nearby objects.
- Clean or replace the air filter.
|
Flashing blue |
Varies |
Flashing orange |
Varies |
Varies |
The lamp is past its replacement period and needs to
be replaced to avoid damage. Do not continue using the
projector. |
Flashing blue |
Varies |
Varies |
Varies |
Orange |
Low air flow through the air filter.
- Make sure
that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
- Clean or
replace the air filter.
- If the
problem persists, unplug the projector and contact Epson for
help.
|
Varies |
Varies |
Varies |
Varies |
Flashing orange |
It is time to clean the air filter. |