Setting Up Your Product Using the Control Panel

To add your product to a wireless network, you may need to know the name (SSID) and password of your wireless network. If it has security enabled, you also need to know the WEP key or WPA passphrase.
Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software.
  1. Make sure your product is turned on but NOT CONNECTED to your computer with a USB cable.
    Note: With Windows, if you see a Found New Hardware screen, click Cancel and disconnect the USB cable.
  2. Insert the product CD or visit epson.com.jm/support and select your product to download the software package.
  3. Select your language and click Next (Windows), or click Continue and click Continue again (Mac).
  4. Accept the software license agreement to continue with software installation.
  5. When you see one of these screens, click Install.

    Windows



    Mac



    Note: On a Mac, make sure you install Software Updater to receive firmware and software updates for your product.
    Software installation may take several minutes. Wait for the installation to complete.
  6. Mac: If you see the following message, click Yes or No to continue.


  7. When the Printer Setup screen appears, click Next (Windows) or Start (Mac) to begin setting up your product on your network.


  8. When you see this screen, select Wireless connection and click Next (Windows) or Continue (Mac).


  9. When you see this screen, select Set up printer for the first time and click Next (Windows) or Continue (Mac).


  10. When you see this screen, select Using printer buttons and click Next (Windows) or Continue (Mac).


  11. When you see the Know Your Wireless Network screen, click Next (Windows) or Continue (Mac).
  12. Follow the on-screen instructions to select your wireless network settings from your product control panel. When you finish, continue with the steps here.
  13. Mac: When you see this screen, click Add Printer and follow the on-screen instructions to add your product and the print queue to your system. Then click Continue.


    Note: Be sure to select your Epson product in the Use or Print Using drop-down list.
  14. When you see this screen, print a test page and click Next (Windows) or Continue (Mac).


  15. Follow the on-screen instructions to complete product setup. When you see this screen, click Exit (Windows) or Close (Mac) to close the installation program.


Parent topic: Setting Up Your Product on a Wireless Network