Paper out. Load paper. |
No paper is loaded. Load paper in the product |
Paper feed error or jam. |
Paper is jammed in the product. Remove the jammed
paper, then press the start button to clear the
error. |
Combination of IP address and subnet mask is
invalid. |
There is a problem with the network connection to your
product. |
The printer's ink pad is at the end of its service
life. |
The ink pad is at the end of its service life. Turn off
the product and contact Epson for support. |
The printer's ink pad is nearing the end of its service
life. |
The ink pad is near the end of its service life.
Contact Epson for support. (To continue printing, press the
start button.) |
Communication error. Connect computer. |
Make sure the computer is connected to your product and
your software is installed correctly. |
Paper Configuration is disabled. Some features may not
be available. |
The Paper Configuration setting must be turned on to
use AirPrint. |
You need to replace the following ink
cartridge(s). |
Replace the ink cartridge indicated on the LCD
screen. |
Operation canceled. Error while saving. |
Make sure the memory card is inserted correctly and
meets the specifications for your product. |
Recovery mode |
An error has occurred during firmware updating. Connect
your product using a USB cable and try updating the firmware again.
If you still receive this error message, contact Epson for
support. |
Printer error. Turn power off and on again. |
A fatal error has occurred. Turn the product off and
then back on again. If the error continues, check for a paper jam.
If there is no paper jam, contact Epson for support. |