Connecting to a Video Source for Sound

You can play sound through the projector's speaker system if your video source has audio output ports. Connect the projector to the video source using a stereo mini-jack adapter cable (with one 3.5 mm mini-plug and two RCA plugs).
Note: If you connected your video source to the projector using an HDMI cable, the audio signal is transferred with the video signal; you do not need an additional cable for sound.
  1. Connect the audio cable to your video source's audio-out ports.
  2. Connect the other end of the cable to the projector's Audio port or ports.



Parent topic: Connecting to Video Sources
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use