If your product does not appear in the Mac printer
window, try these solutions:
- Turn your
product off, wait 30 seconds, then turn it back on again.
- If you are
connecting the product via Wi-Fi Protected Setup (WPS) and the
WiFi light on your product is not solid
green, make sure you press the Wi-Fi button on the product within 2
minutes of pressing the WPS button on your router. Hold down the
Wi-Fi
button on the product for 3 seconds.
- If you are
connecting the product wirelessly via EpsonNet Setup and the
WiFi light on your product is not solid
green, make sure your product software was installed correctly. If
necessary, reinstall your software.
Note: If you
are using a 5 GHz wireless router, set the router to operate in
dual band (2.4 GHz and 5 GHz) mode. If your router uses a
single network name (SSID) for both the 2.4 GHz and 5 GHz
band, give each band its own network name (SSID) instead, such as
Home Network 2.4 GHz and Home Network 5 GHz. See your
router documentation or contact your internet service provider for
instructions.