- Color Density
- Adjusts the ink saturation level.
- Drying Time per Print Head Pass
- Pauses print head movement for up to 5 seconds after each pass to allow ink to dry. This lets you print with non-Epson media and avoid smearing the ink.
- Paper Feed Adjustment
- Modifies the speed of the paper feeding to compensate for banding in the direction of the print head.
- Paper Suction
- Decreases the paper suction when printing on thin media, such as drafting paper or backlight film.
- Paper Thickness
- Adjusts the appearance of details in printouts based on paper thickness.
Note: If you have
high speed (bi-directional) printing enabled and small type or fine
details appear too thick, you may need to adjust the paper
thickness setting.
- Platen Gap
- Adjusts the distance from the paper to the print head. (Use a wider setting if you are seeing edge marks or scuffs on your prints.)
- Roll Paper Back Tension
- Increases or automatically controls the tension for cloth or thin paper, or if the roll paper wrinkles during printing.