Starting a Scan Using the Product Control Panel

You can scan an image to a variety of destinations using your product's control panel.
  1. Make sure you installed the product software and connected the product to your computer or network.
    Note: Restart your computer after installing the product software to enable scanning from the control panel.
  2. Place your original on the product for scanning.
    Note: To scan a multi-page document, place your originals in the ADF.
  3. Press the  home button, if necessary.
  4. Select Scan. You see a screen like this:

  5. Select one of the following Scan to options:
    • Network Folder/FTP saves your scan file to a pre-defined folder on a network computer or FTP server. To use this feature, you must first create a shared network folder or obtain the FTP site address, and optionally register the location to your product's contact list.
    • Email lets you send scanned files through a pre-configured email server.
    • Computer lets you scan to a connected computer using your saved scan settings.
    • Memory Device saves your scan file on a USB device and lets you select the file format, quality, and other settings.
    • Cloud sends your scanned files to a destination that you have registered with Epson Connect.
    • Computer (WSD) lets you manage network scanning in Windows 10, Windows 8.x, Windows 7, or Windows Vista (English only). To use this feature, you must first set up a WSD (Web Services for Devices) port on your Windows 7 or Windows Vista computer (the port is set up automatically on Windows 10 and Windows 8.x).
  6. Follow the instructions in the links below to set up for scanning or complete your scan.
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use