Settings on the Extended menu let you customize various projector setup features that control its operation.
| Setting | Options | Description |
|---|---|---|
| Home Screen | Home Screen Auto
Disp.
Custom Function 1 Custom Function 2 |
Adjust settings on the Home Screen
Home Screen Auto Disp.: controls whether the Home screen displays automatically when the projector is turned on Custom Function 1 / Custom Function 2: let you customize the options displayed on the Home screen and save your settings as a preset |
| Display | — | See the Display settings table in this topic |
| Projection | Front
Front/Ceiling Rear Rear/Ceiling |
Selects the way the projector faces the screen so the image is oriented correctly |
| Operation | — | See the Operation settings table in this topic |
| Standby Mode | Communication Off
Communication On |
Indicates whether the projector can be monitored over a network while in standby mode |
| Language | Various languages available | Selects the language for projector menu and message displays (not changed by Reset option) |
Display settings
| Setting | Description |
|---|---|
| Menu Position | Selects the position of the projector menu displayed on the screen |
| Messages | Controls whether messages are displayed on the screen |
| Display Background | Selects the screen color or logo to display when no signal is received |
| Startup Screen | Controls whether a special screen appears when the projector starts up |
| Standby Confirmation | Displays a confirmation message after pressing the Standby button on the remote control |
| Panel Alignment | Corrects color misalignment in the projected image |
| Color Uniformity | Adjusts the color tone balance |
Operation settings
| Setting | Description |
|---|---|
| Direct Power On | Turns on the projector when you plug it in |
| Sleep Mode | Automatically places the projector in standby mode after an interval of inactivity |
| Sleep Mode Timer | Sets the time before the projector automatically turns off (Sleep Mode must be turned on) |
| Illumination | Turns off the lights on the projector |
| Trigger Out | Outputs a DC 12V signal from the 3.5 mm mini-jack Trigger Out port whenever the projector is turned on |
| High Altitude Mode | Regulates the projector’s operating temperature at altitudes above 4921 feet (1500 m) |
Note: The
Reset setting does not reset the
Memory, Projection, High
Altitude Mode, Standby
Mode or Language
settings.