Setting Up Network Scanning

You can set up network scanning using one of these methods:

Note: Make a note of the IP address or host name of the Epson Network Interface Unit or scanner so you can enter it in these steps.
  1. Do one of the following:
    • Manually configure your scanner to connect to your network
    • Connect the Epson Network Interface Unit to your scanner and verify they are working properly.
  2. Do one of the following to start the Epson Scan 2 Utility:
    • Windows 10: Click and select EPSON > Epson Scan 2 Utility.
    • Windows 8.x: Navigate to the Apps screen and select Epson Scan 2 Utility.
    • Windows (other versions): Click or Start, and select All Programs or Programs. Select EPSON > Epson Scan 2 > Epson Scan 2 Utility.
    • Mac: Open the Applications folder, open the Epson Software folder, and select Epson Scan 2 Utility.
  3. Select Settings from the Scanner drop-down list. You see a screen like this:


    Note: If you see an Enable Editing button (Windows) or a lock icon (Mac), click it so that you can modify the scanner settings.
  4. Select your scanner and click Add. You see a screen like this:


  5. Do one of the following:
    • Under Search for Network, select the IP address of your Epson Network Interface Unit or scanner and click Add.
    • Select the Enter address setting, type in the IP address or host name of your Epson Network Interface Unit or scanner, and click Add.
  6. Click OK to save your settings and then close Epson Scan 2 Utility.
Related tasks
Scanning to Network Computers from the Network Interface Unit - Windows