You can
create a Quick Wireless Connection USB Key to quickly connect the
projector to a Windows computer wirelessly. Then you can project
your presentation and remove the key when you are done.
Note: A USB
flash drive is not included with your projector.
Create a Quick Wireless
Connection USB Key with a USB flash drive and the Epson iProjection (Windows/Mac) software.
Note: See the
online Epson iProjection
Operation Guide (Windows/Mac) for instructions.
Turn on the projector.
Remove the wireless LAN
module from the USB-A port
(EX3260/EX5260/Pro EX9210/VS250/VS350/VS355).
Insert the USB key into the projector's USB-A port.
EX3260/EX5260/Pro
EX7260/VS250/VS350/VS355
Pro
EX9210/Pro EX9220
You see a projected message that the network information update is
complete.
Remove the USB key.
Reinsert the wireless LAN
module into the projector (EX3260/EX5260/Pro
EX9210/VS250/VS350/VS355).
Insert the USB key into a USB port on your
computer.
Note: In
Windows Vista, if you see the AutoPlay window, select Run MPPLaunch.exe, then select Allow on the next screen.
Follow the on-screen instructions to install the
Epson iProjection (Windows/Mac)
software.
Note: If you
see a Windows Firewall message, click Yes to disable the firewall. You need
administrator authority to install the software. If it is not
installed automatically, double-click MPPLaunch.exe in the USB key.
After a few minutes, your computer image is displayed by the
projector. If it does not appear, press the LAN or Source
Search button on your remote control or restart your
computer.
Run your presentation as necessary.
When you finish projecting wirelessly, select the
Safely Remove Hardware option in
the Windows taskbar, then remove the USB key from your
computer.
Note: You can
share the USB key with other computers without disconnecting your
computer. You may need to restart your computer to reactivate your
wireless LAN connection.