Charging the 3D Glasses

Charge the glasses when the status light on the glasses flashes red to indicate a low battery.
  1. Connect the smaller end of the charging cable to the port on the bridge of the glasses.


    Note: Make sure you connect the cable in the correct orientation or you may damage the glasses or cable.
  2. Connect the other end of the cable to the USB Type A port on the projector or any other device such as a computer that has an active USB Type A port.
    Note: The projector must be turned on to charge the glasses.
The glasses are fully charged when the status light on the glasses stays green.
Parent topic: Viewing 3D Images
Was this page helpful? Yes or No.
Privacy Policy | Your California Privacy Rights | Terms of Use