You can
print on plain paper envelopes in this size: No.
10 (4.1 × 9.5 inches
[105 × 241 mm]). If your
product has two paper cassettes, you can load No. 10 size envelopes
in Cassette 1 only.
Close the paper stopper and output tray, if
necessary.
Pull out the paper cassette and remove
the paper cassette cover.
Slide the edge guides outward.
Load envelopes printable side down and flap edge right as
shown.
Caution:
To prevent paper feeding problems, make
sure you do not load too many envelopes in the cassette.
Slide the edge guides against the envelopes, but not too
tightly.
Note: Make
sure the envelopes are loaded against the edge guide and not
sticking out from the end of the cassette.
Close the paper cassette cover and gently
insert the paper cassette.
Note: The
envelopes may slide forward slightly as you insert the cassette.
This is normal.
When prompted by the product's LCD screen, select
Envelope #10 for the Paper Size
and Envelope for the Paper Type,
and select OK.
Extend the output tray and open the paper stopper.
Always follow these envelope loading guidelines:
If you have
trouble loading a stack of envelopes, press each envelope flat
before loading it or load one envelope at a time.
If print quality
declines when printing multiple envelopes, try loading one envelope
at a time.
Do not load
envelopes that are curled, folded, or too thin.
Do not load envelopes that have adhesive
surfaces.